Water Testing in Cape Town with SANS Water. We test ground water and council water with a SANAS accredited laboratory

Water Availability Scan Before Drilling: Is It Worth It?

Drilling first and hoping for water is an expensive gamble. However, there is a smarter way. A water availability scan shows where groundwater is most likely to be, and how much you can expect. So, should you do a water availability scan before drilling? For most properties, yes. Here is why.

What Is a Water Availability Scan?

A water availability scan is an assessment of your property’s groundwater potential. It looks at geology, aquifer type, nearby boreholes and recharge. Then it points to the best place to drill. In short, you gather evidence first and drill second.

Why Cape Town Ground Is Tricky

Cape Town sits above three main aquifers. They are the Table Mountain Group, the Cape Flats and Atlantis. Each one behaves differently. For example, the Cape Flats hold thick sand with a shallow water table. In contrast, the Table Mountain Group stores water in rock fractures. Therefore, a few metres either way can separate a strong supply from a dry hole.

Under the city bowl and northern suburbs, shale and granite weather into clayey soils of variable depth. Because of this, guessing is risky.

Is It Worth Getting a Borehole in Cape Town?

Many homeowners ask, is it worth getting a borehole? The 2015 to 2018 drought brought Cape Town close to Day Zero. Since then, thousands of homes and businesses have put in boreholes or wellpoints. Meanwhile, municipal supply stays vulnerable in dry years. A borehole can give you security and lower water bills. But it only pays off if it delivers reliable water.

How Much Will a Borehole Cost?

Now for the numbers. Published 2026 price guides put borehole installation in South Africa at R30,000 to R150,000. Drilling alone runs about R500 to R1,500 per metre. Pump equipment adds roughly R8,000 to R30,000. Water quality testing adds R1,500 to R3,000. These are indicative figures, so always get a written quote.

What Does a Dry Hole Cost?

Consider a 100 m hole. At R500 to R1,500 per metre, drilling alone costs R50,000 to R150,000. Most drillers charge per metre drilled, whether or not water appears. Moreover, a second attempt means paying for drilling again. That is the real risk of drilling blind.

Should I Do a Water Availability Scan Before Drilling?

Yes, in most cases. A scan costs far less than a drilling programme. It also narrows down where you drill. Here is how it saves money:

  • Fewer dry holes. You drill where the evidence is strongest.
  • Right depth. You avoid paying for metres of useless rock.
  • Right pump. Expected yield guides pump size, so you do not overspend.
  • Right treatment. Knowing the aquifer helps predict the filtration you will need.

What If You Strike Water Without a Scan?

You might. Some properties have good water almost anywhere. However, finding water is not the same as finding good water. A scan helps you tap a richer, healthier aquifer, not just any water. For example, it can steer you toward productive zones and away from poor ones. In addition, it helps you stay clear of contamination sources. Consequently, you start with stronger yield, steadier supply and cleaner water.

Why a Scan Is Simpler Than Trial and Error

A scan needs no drilling rig on your property. It causes no mess and no damage to your garden. Instead of guessing, you get a clear recommendation. Furthermore, every driller can then quote on the same facts. Drilling by trial and error offers none of this. You simply pay for each attempt as you go.

Who Does Boreholes? Choosing Borehole Drillers in Cape Town

Who does boreholes in Cape Town? Many drillers work across the Western Cape. Therefore, choose carefully. Look for drillers and testers registered with industry bodies such as the Borehole Water Association of Southern Africa. Ask for references from similar aquifers. Also, ask each driller to quote against your scan report. That way, you compare like with like.

Yield Testing After Drilling

After drilling comes a yield test. First, step tests show how the water level responds to rising demand. Then a 24-hour constant-rate test shows how the borehole behaves over time. Finally, recovery readings show how fast the water level bounces back. The result is a borehole certificate with the sustainable yield and pump depth. Banks, buyers and municipalities often ask for one.

Water Testing: Where Can I Get My Water Tested?

Where can I get my water tested? Start with an accredited laboratory or a specialist such as SANS Water. SANS 241 water testing checks your water against South Africa’s national drinking water standard. Price guides put basic water quality tests at R1,500 to R3,000. Importantly, test early, then retest every year.

Using Borehole Water in the House

Using borehole water in the house is common. However, clear water is not always safe water. Groundwater can carry bacteria, salts, iron and other contaminants. Therefore, test before you drink it, shower in it or cook with it. Once you have results, treatment can be matched to the problem.

Filtration During a Drought

Filtration during a drought deserves extra attention. When aquifers are under pressure, water quality can shift. For instance, salts may rise, especially close to the coast. As a result, last year’s test may not reflect today’s water. So, retest regularly and adjust your filtration to match.

What Is the Cost of a Borehole and a Filtration System?

The cost of a borehole and a filtration system depends on depth, geology and water quality. The borehole itself typically falls between R30,000 and R150,000. Filtration is then specified from your test results. Therefore, there is no guesswork and no over-buying. In other words, scan first, test second, and budget once.

The Bottom Line

A scan will not guarantee water. However, it stacks the odds in your favour. It protects your budget, your aquifer and your family’s health. So, before you call borehole drillers in Cape Town, get the facts about what lies beneath your property.

Talk to Mike at SANS Water

Thinking about a borehole? Start with a scan, not a rig. Speak to Mike at SANS Water for water availability scans, SANS 241 water testing and filtration advice.

Visit www.sanswater.co.za or WhatsApp 084 400 4300.

© 2026 SANS Water | All rights reserved | Terms and Conditions | Design and development by Michael Hastie.

Water Testing in Cape Town with SANS Water. We test ground water and council water with a SANAS accredited laboratory

Site created and maintained by www.mikehastiemedia.com

+27 (0) 21 788 1302 | mike@sanswater.co.za
50 Promenade Road, Lakeside, Cape Town, South Africa